This page lists the metrics collected by the NetApp SolidFire integration and describes the default monitoring configuration applied when the integration is installed. You can use this information to understand what is monitored out-of-the-box and how to customize thresholds, templates, and alert behaviour for your environment.
Supported Metrics
The metrics collected by the NetApp SolidFire integration are grouped into logical categories based on the monitored component type. Each category is represented as a tabbed table that displays the native type, metric names, display labels, units, supported versions, and descriptions.
| Native Type | Metric Name | Display Name | Units | Version | Description | Metric Group |
|---|---|---|---|---|---|---|
| NetApp SolidFire Cluster | solidfire_cluster_ClusterPairStatus | SolidFire Paired Cluster Status | NA | 1.0.0 | The status of the connection between the paired clusters. Possible values: Unconfigured(0), Connected(1), Misconfigured(2) and Disconnected(3) | |
| NetApp SolidFire Volume Account | solidfire_volume_account_Status | SolidFire Volume Account Status | NA | 1.0.0 | Returns the current status of the Volume Account. Possibe states are removed(0), active(1), locked(2) | |
| NetApp SolidFire Volume | solidfire_volume_Status | SolidFire Volume Status | NA | 1.0.0 | Current status of the Volume.Possible values are init(0), active(1), deleted(2) | |
| solidfire_volume_ReplicationStatus | SolidFire Remote Volume Replication Status | NA | 1.0.0 | Returns the status of volume replication.Possible values are PausedDisconnected(0),ResumingConnected(1), ResumingRRSync(2), ResumingLocalSync(3),ResumingDataTransfer(4), Active(5), Idle(6), PausedClusterFull(7), PausedExceededMaxSnapshotCount(8), PausedManual(9), PausedManualRemote(10), PausedMisconfigured(11), PausedQoS(12), PausedSlowLink(13), PausedVolumeSizeMismatch(14), PausedXCopy(15) and StoppedMisconfigured(16) | ||
| solidfire_volume_snapshot_Status | SolidFire Volume Snapshot Status | NA | 1.0.0 | Current status of the snapshot.Possible values are unknown(0), preparing(1), remoteSyncing(2), done(3), active(4), cloning(5) | ||
| NetApp SolidFire Drive | solidfire_drive_Status | Solidfire Drive Status | NA | 1.0.0 | Drive Status, Possible status are available(0), active(1), erasing(2), failed(3), removing(4) |
| Native Type | Metric Name | Display Name | Units | Version | Description | Metric Group |
|---|---|---|---|---|---|---|
| NetApp SolidFire Cluster | solidfire_cluster_TotalCapacity | Solidfire Cluster TotalCapacity | GB | 1.0.0 | The physical capacity of the cluster, measured in GB | |
| solidfire_cluster_UsedCapacity | SolidFire Cluster Used Capacity | GB | 1.0.0 | The amount of space used on the cluster,measured in GB | ||
| NetApp SolidFire Volume | solidfire_volume_TotalCapacity | SolidFire Volume Total Capacity | GB | 1.0.0 | Total Capacity of the Volume in GB | |
| NetApp SolidFire Drive | solidfire_drive_TotalCapacity | SolidFire Drive Toatal Capacity | GB | 1.0.0 | Total capacity of the drive |
| Native Type | Metric Name | Display Name | Units | Version | Description | Metric Group |
|---|---|---|---|---|---|---|
| NetApp SolidFire Cluster | solidfire_event_Statistics | solidfire Event Statistics | NA | 1.0.0 | Provides the count of number of evnts polled within the frequency |
| Native Type | Metric Name | Display Name | Units | Version | Description | Metric Group |
|---|---|---|---|---|---|---|
| NetApp SolidFire Cluster | solidfire_cluster_Reads | SolidFire Cluster ReadOps | rops | 1.0.0 | Number of read operations performed on the cluster | |
| solidfire_cluster_Writes | SolidFire Cluster WriteOps | wops | 1.0.0 | Number of write operations performed on the cluster | ||
| solidfire_cluster_ReadBytes | SolidFire Cluster ReadBytes | Bps | 1.0.0 | Number of bytes read on the cluster | ||
| solidfire_cluster_WriteBytes | SolidFire Cluster WriteBytes | Bps | 1.0.0 | Number of bytes written to the cluster | ||
| NetApp SolidFire Node | solidfire_node_ClusterBytesIn | Solidfire Node Cluster Bytes In | Bps | 1.0.0 | Bytes received on the cluster VLAN | |
| solidfire_node_ClusterBytesOut | Node Cluster Bytes Out | Bps | 1.0.0 | Bytes sent on the cluster VLAN | ||
| solidfire_node_StorageBytesIn | Node Storage Bytes In | Bps | 1.0.0 | Bytes received on the storage VLAN | ||
| solidfire_node_StorageBytesOut | Node Storage Bytes Out | Bps | 1.0.0 | Bytes sent on the storage VLAN | ||
| solidfire_node_MgmtBytesIn | Node Management Bytes In | Bps | 1.0.0 | Bytes received on the management VLAN | ||
| solidfire_node_MgmtBytesOut | Node Management Bytes Out | Bps | 1.0.0 | Bytes sent on the management VLAN | ||
| NetApp SolidFire Volume | solidfire_volume_Reads | SolidFire Volume Reads | rops | 1.0.0 | The number of read IOPs performed on this volume. | |
| solidfire_volume_Writes | SolidFire Volume Writes | wops | 1.0.0 | The number of write IOPs performed on this volume | ||
| solidfire_volume_ReadBytes | SolidFire Volume Read Bytes | Bps | 1.0.0 | The number of bytes read from this volume | ||
| solidfire_volume_WriteBytes | SolidFire Volume Write Bytes | Bps | 1.0.0 | The number of bytes written to this volume | ||
| solidfire_volume_ReadLatency | SolidFire Volume Read Latency | microsec | 1.0.0 | The average time in microseconds to complete read operations | ||
| solidfire_volume_WriteLatency | SolidFire Volume Write Latency | microsec | 1.0.0 | Monitors the average time in microseconds to complete write operations | ||
| solidfire_volume_UnalignedWrites | SolidFire Volume Unaligned Writes | wps | 1.0.0 | Number of unaligned writes performed on this volume | ||
| solidfire_volume_UnalignedReads | SolidFire Volume Unaligned Reads | rps | 1.0.0 | Number of unaligned reads performed on this volume |
| Native Type | Metric Name | Display Name | Units | Version | Description | Metric Group |
|---|---|---|---|---|---|---|
| NetApp SolidFire Cluster | netapp_solidfire_APIStats | NetApp Solidfire API Statistics | NA | 1.0.0 | Provides the number of API calls made within the frequency and resources | |
| solidfire_cluster_PercentageUtilization | SolidFire Cluster Utilization Percentage | % | 1.0.0 | Percent utilization of the clusters bandwidth | ||
| NetApp SolidFire Node | solidfire_node_ClusterNetworkUtilization | Cluster Network Utilization | % | 1.0.0 | Cluster network utilization | |
| solidfire_node_StorageNetworkUtilization | Storage Network Utilization | % | 1.0.0 | Storage Network Utilization | ||
| solidfire_node_CpuUtilization | Node CPU Utilization | % | 1.0.0 | Node CPU percent utilization | ||
| solidfire_node_UsedMemory | Node Memory Used | GB | 1.0.0 | Total memory used in GB | ||
| NetApp SolidFire Volume | solidfire_volume_snapshot_TotalSize | SolidFire Volume Snapshot TotalSize | GB | 1.0.0 | Total Size of the snapshot in GB | |
| solidfire_volume_PercentageUtilization | SolidFire Volume Utilization Percentage | % | 1.0.0 | Percent utilization of the clusters bandwidth used by this volume | ||
| NetApp SolidFire Drive | solidfire_drive_UsedCapacity | SolidFire Drive Used Capacity | GB | 1.0.0 | Used capacity of the drive | |
| solidfire_drive_UsedMemory | SolidFire Drive Used Memory | GB | 1.0.0 | Amount of memory currently used by the node hosting this drive. |
Default monitoring configurations
Netapp Solidfire provides default monitoring components that include:
- Global Device Management Policies
- Global Templates
- Global Monitors
These configurations are applied automatically upon installation. Customize them for your environment by cloning the global versions and modifying thresholds or alerting behaviour.
It is recommended to apply this customization prior to installing the application to prevent unnecessary alerts and reduce noise.
Default Global Device Management Policies available
OpsRamp will have a Global Device Management Policy for each Native Type of NETAPP-SOLIDFIRE. We can find those Device Management Policies at Setup -> Resources -> Device Management Policies -> Search with suggested names in global scope. Each Device Management Policy follows below naming convention.{appName nativeType - version}
Ex : netapp-solidfire NetApp SolidFire Cluster - 1 (i.e, appName = netapp-solidfire, nativeType = NetApp SolidFire Cluster, version = 1)
Default Global Templates available
OpsRamp will have a Global template for each Native Type of NETAPP-SOLIDFIRE. We can find those templates at Setup -> Monitoring -> Templates -> Search with suggested names in global scope. Each template follows below naming convention.{appName nativeType 'Template' - version}
Ex : netapp-solidfire NetApp SolidFire Cluster Template - 1 (i.e, appName = netapp-solidfire, nativeType = NetApp SolidFire Cluster, version = 1)
Default Global Monitors available
OpsRamp will have a Global Monitors for each Native Type which has monitoring support. We can find those monitors at Setup -> Monitoring -> Monitors -> Search with suggested names in global scope. Each Monitors follows below naming convention.{monitorKey appName nativeType - version}
Ex : NetApp SolidFire Cluster Monitor netapp-solidfire NetApp SolidFire Cluster 1(i.e, monitorKey = NetApp SolidFire Cluster, appName = netapp-solidfire, nativeType = NetApp SolidFire Cluster, version = 1)