Supported Versions
ONTAP API 7-mode APIs
NetApp Filer version 8.2.2

Introduction

NetApp Filers is a high-performance, mission critical product used by large enterprises and service providers.

OpsRamp monitors NetApp Filer using SNMP and the NetApp API.

Prerequisites

Transport Layer Security (TLS) must be enabled on the NetApp Filer.

To check the TLS status:

SSH username@hostname
system services web show

If TLS is not enabled: tls.enable on

Example output:

External Web Services: true
               Status: online
   HTTP Protocol Port: 80
  HTTPS Protocol Port: 443
        TLSv1 Enabled: true
        SSLv3 Enabled: true
        SSLv2 Enabled: true

Supported Metrics

Click here to view the supported metrics
Metric NameMetric Display NameUnits
aggregate.total_transfers

Total number of disk operations serviced by the aggregate.
netapp.filer.aggregate.total_transfersPER_SEC
aggregate.user_reads

Number of user read operations performed by the aggregate.
netapp.filer.aggregate.user_readsPER_SEC
aggregate.user_writes

Number of user write operations performed by the aggregate.
netapp.filer.aggregate.user_writesPER_SEC
aggregate.cp_reads

Number of read operations to the aggregate during consistency-point processing.
netapp.filer.aggregate.cp_readsPER_SEC
aggregate.user_read_blocks

Number of blocks transferred for user read operations.
netapp.filer.aggregate.user_read_blocksPER_SEC
aggregate.user_write_blocks

Number of blocks transferred for user write operations.
netapp.filer.aggregate.user_write_blocksPER_SEC
aggregate.cp_read_blocks

Number of blocks transferred for consistency-point read operations.
netapp.filer.aggregate.cp_read_blocksPER_SEC
cifs.cifs_ops

Total number of CIFS operations.
netapp.filer.cifs.cifs_opsPER_SEC
cifs.cifs_read_ops

Total number of CIFS read operations per second.
netapp.filer.cifs.cifs_read_opsPER_SEC
cifs.cifs_write_ops

Total number of CIFS write operations per seconds.
netapp.filer.cifs.cifs_write_opsPER_SEC
disk.total_transfers

Total number of disk operations performed by the aggregate.
netapp.filer.disk.total_transfersPER_SEC
disk.user_reads

Number of user read operations performed by the aggregate.
netapp.filer.disk.user_readsPER_SEC
disk.user_writes

Number of user write operations performed by the aggregate.
netapp.filer.disk.user_writesPER_SEC
disk.cp_reads

Number of read operations to the aggregate during consistency point processing.
netapp.filer.disk.cp_readsPER_SEC
disk.guarenteed_read_blocks

Number of blocks transferred for guaranteed read operations per second.
netapp.filer.disk.guarenteed_read_blocksPER_SEC
disk.guarenteed_write_blocks

Number of blocks transferred for guaranteed write operations per second.
netapp.filer.disk.guarenteed_write_blocksPER_SEC
disk.user_read_blocks

Number of blocks transferred for user read operations.
netapp.filer.disk.user_read_blocksPER_SEC
disk.user_write_blocks

Number of blocks transferred for user write operations.
netapp.filer.disk.user_write_blocksPER_SEC
disk.cp_read_blocks

Number of blocks transferred for consistency-point read operations.
netapp.filer.disk.cp_read_blocksPER_SEC
fcp.fcp_ops

FCP operations per second
netapp.filer.fcp.fcp_opsPER_SEC
fcp.fcp_write_data

FCP bytes written per second.
netapp.filer.fcp.fcp_write_dataB_PER_SEC
fcp.fcp_read_data

FCP bytes read per second.
netapp.filer.fcp.fcp_read_dataB_PER_SEC
fcp.fcp_read_ops

Total number of read operations for all the LUNs in the system accessed over FCP.
netapp.filer.fcp.fcp_read_opsPER_SEC
fcp.fcp_write_ops

Total number of write operations for all the LUNs in the system accessed over FCP.
netapp.filer.fcp.fcp_write_opsPER_SEC
ifnet.recv_packets

Packets received per second.
netapp.filer.ifnet.recv_packetsPER_SEC
ifnet.recv_errors

Errors per second while receiving packets.
netapp.filer.ifnet.recv_errorsPER_SEC
ifnet.send_packets

Packets sent per second.
netapp.filer.ifnet.send_packetsPER_SEC
ifnet.send_errors

Errors per second while sending packets.
netapp.filer.ifnet.send_errorsPER_SEC
ifnet.collisions

Collisions per second on CSMA interfaces.
netapp.filer.ifnet.collisionsPER_SEC
ifnet.recv_data

Total bytes received per second.
netapp.filer.ifnet.recv_dataB_PER_SEC
ifnet.send_data

Total bytes sent per second.
netapp.filer.ifnet.send_dataB_PER_SEC
ifnet.recv_mcasts

Packets received per second through multicast.
netapp.filer.ifnet.recv_mcastsPER_SEC
ifnet.send_mcasts

Packets sent per second through multicast.
netapp.filer.ifnet.send_mcastsPER_SEC
iscsi.iscsi_ops

iSCSI operations per second.
netapp.filer.iscsi.iscsi_opsB_PER_SEC
iscsi.iscsi_read_data

iSCSI bytes read per second.
netapp.filer.iscsi.iscsi_read_dataB_PER_SEC
iscsi.iscsi_read_ops

Total number of read operations for all the LUNs in the system accessed over iSCSI.
netapp.filer.iscsi.iscsi_read_opsPER_SEC
iscsi.iscsi_write_ops

Total number of write operations for all the LUNs in the system accessed over iSCSI.
netapp.filer.iscsi.iscsi_write_opsPER_SEC
lun.read_ops

Read operations per second.
netapp.filer.lun.read_opsPER_SEC
lun.write_ops

Write operations per second.
netapp.filer.lun.write_opsPER_SEC
lun.other_ops

Other operations per second.
netapp.filer.lun.other_opsPER_SEC
lun.read_data

Read bytes per second.
netapp.filer.lun.read_dataB_PER_SEC
lun.write_data

Write bytes per second.
netapp.filer.lun.write_dataB_PER_SEC
lun.total_ops

Total number of operations on the LUN.
netapp.filer.lun.total_opsPER_SEC
lun.queuefull

NFS operations per second
netapp.filer.lun.queue_fullPER_SEC
nfsv3.nfsv3_ops

Total number of NFSv3 operations.
netapp.filer.nfsv3.nfsv3_opsPER_SEC
nfsv3.nfsv3_read_ops

Total NFSv3 read operations.
netapp.filer.nfsv3.nfsv3_read_opsPer_SEC
nfsv3.nfsv3_write_ops

Total NFSv3 write operations.
netapp.filer.nfsv3.nfsv3_write_opsPER_SEC
nfsv4.nfsv4_ops

Number of total NFSv4 operations.
netapp.filer.nfsv4.nfsv4_opsPER_SEC
nfsv4.nfsv4_read_ops

Number of NFSv4 read operations.
netapp.filer.nfsv4.nfsv4_read_opsPER_SEC
nfsv4.nfsv4_write_ops

Number of NFSv4 write operations.
netapp.filer.nfsv4.nfsv4_write_opsPER_SEC
qtree.nfs_ops

NFS operations per second.
netapp.filer.qtree.nfs_opsPER_SEC
qtree.cifs_ops

CIFS operations per second.
netapp.filer.qtree.cifs_opsPER_SEC
qtree.internal_ops

Number of internal operations generated by activities such as SnapMirror and backup to the qtree.
netapp.filer.qtree.internal_opsPER_SEC
system.net_data_recv

Network KB received per second.
netapp.filer.system.net_data_recvKB_PER_SEC
system.net_data_sent

Network KB sent per second.
netapp.filer.system.net_data_sentKB_PER_SEC
system.disk_data_read

Disk KB read per second.
netapp.filer.system.disk_data_readKB_PER_SEC
system.disk_data_written

Disk KB written per second.
netapp.filer.system.disk_data_writtenKB_PER_SEC
system.total_ops

Total operations per second.
netapp.filer.system.total_opsPER_SEC
system.read_ops

Read operations per second.
netapp.filer.system.read_opsPER_SEC
system.write_ops

Write operations per second.
netapp.filer.system.write_opsPER_SEC
system.cifs_ops

CIFS operations per second.
netapp.filer.system.cifs_opsPER_SEC
system.fcp_ops

FCP operations per second.
netapp.filer.system.fcp_opsPER_SEC
system.http_ops

HTTP operations per second.
netapp.filer.system.http_opsPER_SEC
system.iscsi_ops

iSCSI operations per second.
netapp.filer.system.iscsi_opsPER_SEC
system.nfs_ops

NFS operations per second.
netapp.filer.system.nfs_opsPER_SEC
vfiler.vfiler_net_data_recv

Network data received in kilobytes per second.
netapp.filer.vfiler.vfiler_net_data_recvKB_PER_SEC
vfiler.vfiler_net_data_sent

Network data sent in kilobytes per second.
netapp.filer.vfiler.vfiler_net_data_sentKB_PER_SEC
vfiler.vfiler_net_data_sent

Network data sent in kilobytes per second.
netapp.filer.vfiler.vfiler_net_data_sentKB_PER_SEC
vfiler.vfiler_read_ops

Read operations on the vFiler unit.
netapp.filer.vfiler.vfiler_read_opsPER_SEC
vfiler.vfiler_write_ops

Write operations on the vFiler unit.
netapp.filer.vfiler.vfiler_write_opsPER_SEC
vfiler.vfiler_misc_ops

Miscellaneous operations on the vFiler unit.
netapp.filer.vfiler.vfiler_misc_opsPER_SEC
vfiler.vfiler_read_bytes

Data read in kilobytes per second on the vFiler unit.
netapp.filer.vfiler.vfiler_read_bytesKB_PER_SEC
vfiler.vfiler_write_bytes

Data written in kilobytes per second on the vFiler unit.
netapp.filer.vfiler.vfiler_write_bytesKB_PER_SEC
volume.total_ops

Number of operations performed by the volume.
netapp.filer.volume.total_opsPER_SEC
volume.read_ops

Number of reads to the volume.
netapp.filer.volume.read_opsPER_SEC
volume.read_data

Bytes read from the volume.
netapp.filer.volume.read_dataB_PER_SEC
volume.write_data

Bytes written to the volume.
netapp.filer.volume.write_dataB_PER_SEC
volume.other_ops

Number of other operations to the volume.
netapp.filer.volume.other_opsPER_SEC
volume.write_ops

Number of writes to the volume.
netapp.filer.volume.write_opsPER_SEC
volume.nfs_read_ops

Number of NFS reads to the volume.
netapp.filer.volume.nfs_read_opsPER_SEC
volume.nfs_write_ops

Number of NFS writes to the volume.
netapp.filer.volume.nfs_write_opsPER_SEC
volume.nfs_other_ops

Number of other NFS operations to the volume.
netapp.filer.volume.nfs_other_opsPER_SEC
volume.cifs_read_ops

Number of CIFS reads to the volume.
netapp.filer.volume.cifs_read_opsPER_SEC
volume.cifs_write_ops

Number of CIFS writes to the volume.
netapp.filer.volume.cifs_write_opsPER_SEC
volume.cifs_other_ops

Number of other CIFS operations to the volume.
netapp.filer.volume.cifs_other_opsPER_SEC
volume.san_read_ops

Number of block protocol reads to the volume.
netapp.filer.volume.san_read_opsPER_SEC
volume.san_write_ops

Number of block protocol writes to the volume.
netapp.filer.volume.san_write_opsPER_SEC
volume.san_other_ops

Number of other block protocol operations to the volume.
netapp.filer.volume.san_other_opsPER_SEC
volume.flexcache_other_ops

Number of other FlexCache operations to the volume.
netapp.filer.volume.flexcache_other_opsPER_SEC
volume.flexcache_read_ops

Number of FlexCache read operations from the volume.
netapp.filer.volume.flexcache_read_opsPER_SEC
volume.flexcache_write_ops

Number of FlexCache write operations to the volume.
netapp.filer.volume.flexcache_write_opsPER_SEC
raid.tetris_written

Tetrises written per second.
netapp.filer.raid.tetris_writtenPER_SEC
raid.stripes_written

Stripes written per second.
netapp.filer.raid.stripes_writtenPER_SEC
raid.partial_stripes

Partial stripes written per second.
netapp.filer.raid.partial_stripesPER_SEC
raid.full_stripes

Full stripes written per second.
netapp.filer.raid.full_stripesPER_SEC
raid.blocks_written

Blocks written per second.
netapp.filer.raid.blocks_writtenPER_SEC
raid.blocks_read

Blocks read per second.
netapp.filer.raid.blocks_readPER_SEC
aggregate.raid-status

RAID status. Possible values: normal, verifying, SnapMirrored, copying, ironing, mirrored, resyncing, mirror degraded, invalid, needs check, initializing, growing, partial, noparity, degraded, reconstruct, out-of-date, foreign, raid4, raid0, raid_dp, mixed_raid_type.
netapp.filer.aggregate.raid-statusText
aggregate.state

Aggregate state. The possible values: "creating", "destroying", "failed", "frozen", "inconsistent", "iron_restricted", "mounting", "offline", "online", "partial", "quiesced", "quiescing", "restricted", "reverted", "unknown", "unmounted", "unmounting".
netapp.filer.aggregate.stateText
aggregate.size-percentage-used

Percentage of aggregate used. This value is not returned if the aggregate is unusable (i.e., it's offline). Range : [0..100].
netapp.filer.aggregate.size-percentage-usedPercentage
aggregate.size-available

Available bytes in the aggregate. Range: [0..2^64-1].
netapp.filer.aggregate.size-availableBytes
aggregate.size-total

Aggregate total usable size in bytes, not including WAFL reserve and aggregate snapshot reserve. If the aggregate is restricted or offline, a value of 0 is returned. Range : [0..2^64-1].
netapp.filer.aggregate.size-totalBytes
aggregate.size-used

Aggregate bytes used. This value is not returned if the aggregate is unusable (i.e., it's offline). Range: [0..2^64-1].
netapp.filer.aggregate.size-usedBytes
cf.node-state

State of the storage failover of the node.
netapp.filer.cf.node-stateText
cf.state

If state equals "takeover_failed", this is the reason for the takeover failure.
netapp.filer.cf.stateText
cifs.status

The current status of the CIFS service, which will be one of the following: STOPPED, STARTED, STOPPING, STARTING.
netapp.filer.cifs.statusText
diagnosis.status

Overall system health as determined by the diagnosis framework.
netapp.filer.diagnosis.statusText
disk.raid-state

Raid state.
netapp.filer.disk.raid-stateText
disk.is-offline

True if the disk is offline. If the disk is not offline, this element will not be included with the output.
netapp.filer.disk.is-offlineTrue/False
disk.is-prefailed

True if the disk is prefailed and undergoing disk copy (as the source) or waiting for such disk copy to be started, false otherwise.
netapp.filer.disk.is-prefailedTrue/False
disk.is-replacing

True if the disk is marked to be replaced with another disk and undergoing disk copy (as the source) or waiting for such disk copy to be started, false otherwise.
netapp.filer.disk.is-replacingTrue/False
disk.is-zeroed

True if the disk is a spare and has already been zeroed, false otherwise. If disk is not a spare or if it is currently being zeroed, this element will not be included with the output.
netapp.filer.disk.is-zeroedTrue/False
disk.zeroing-percent

Zeroing percentage done, if disk is being zeroed. Element is not returned if disk is not being zeroed. Range : [0..100].
netapp.filer.disk.zeroing-percentText
disk.physical-space

Physical disk size in bytes. Range : [0..2^64-1].
netapp.filer.disk.physical-spaceBytes
disk.used-space

Used space in bytes. Range : [0..2^64-1].
netapp.filer.disk.used-spaceBytes
disk.bytes-per-sector

Bytes per sector. Range : [0..2^31-1].
netapp.filer.disk.bytes-per-sectorBytes
disk.raw-disk-sectors

Number of sectors on disk (as reported by the read capacity command). Range: [0..2^64-1].
netapp.filer.disk.raw-disk-sectorsNumber
lun.online

State of the LUN, ("online" or "offline"). "true" if online, "false" otherwise.
netapp.filer.lun.onlineTrue/False
lun.size

Size of this LUN in bytes in the active FS. This field is unavailable while the LUN is fenced for a restore operation.
netapp.filer.lun.sizeBytes
lun.size-used

Number of bytes used by this LUN. This field is unavailable while the LUN is fenced for a restore operation.
netapp.filer.lun.size-percentage-usedBytes
qtree.status

Status of the qtree. Possible values include: "snapvaulted", "snapmirrored", "normal", and "readonly".
netapp.filer.qtree.statusText
snapmirror.state

SnapMirror pair state. Possible values are: "uninitialized", "snapmirrored", "broken-off", "quiesced", "source", and "unknown".
netapp.filer.snapmirror.stateText
snapmirror.status

SnapMirror pair transfer status. Possible values are: "Idle, "Transferring", "Pending", "Aborting", "Migrating", "Quiescing", "Resyncing", "Waiting", "Syncing", "In-sync" and "Paused". In case the previous transfer was failed/aborted and had a restart checkpoint set, the status could be "Idle with restart checkpoint" or "Pending with restart checkpoint". In addition the status could be "Checking", "Fixing" and "Transferring, Checking" when "snapmirror check" command is being run on the destination volume.
netapp.filer.snapmirror.statusText
volume.state

State of the volume. Possible values: "offline", "online", "restricted" and "unknown" for both flexible and traditional volumes, and "creating", "failed", and "partial" specifically for traditional volumes.
netapp.filer.volume.stateText
volume.mirror-status

The RAID mirror status (for a traditional volume; for a flexible volume, the corresponding value of its containing aggregate). Possible values: CP count check in progress, failed, invalid, limbo, mirror degraded, mirror resynchronizing, mirrored, needs CP count check, uninitialized, (unknown mirror state), and unmirrored.
netapp.filer.volume.mirror-statusText
volume.raid-size

The current RAID group size (for a traditional volume; for a flexible volume, the corresponding value of its containing aggregate). Range : [0..2^31-1].
netapp.filer.volume.raid-sizeBytes
volume.raid-status

The current RAID status (for a traditional volume; for a flexible volume, the corresponding value of its containing aggregate). Possible values: copying, degraded, foreign, growing, initializing, invalid, ironing, mirror degraded, mirrored, needs check, noparity, normal, out-of-date, partial, raid0, raid4, raid_dp, reconstruct, resyncing, snapmirrored, verifying, unrecoverable. This field can contain a combination of the above status values in a comma separated list; for example: "reconstruct,growing".
netapp.filer.volume.raid-statusText
volume.size-available

netapp.filer.volume.size-available.
Number of bytes still available in the volume. If the volume is restricted or offline, a value of 0 is returned. Range : [0..2^64-1].Bytes
volume.size-total

Total usable size (in bytes) of the volume, not including WAFL reserve or volume snapshot reserve. If the volume is restricted or offline, a value of 0 is returned. Range : [0..2^64-1].
netapp.filer.volume.size-totalBytes
volume.size-used

Number of bytes used in the volume. If the volume is restricted or offline, a value of 0 is returned. Range : [0..2^64-1].
netapp.filer.volume.size-usedBytes
iscsi_write_data

Number of data written in the iscsi.
netapp.filer.iscsi.iscsi_write_dataTrue/False

Create a credential

  1. From All Clients, choose a client.

  2. Go to Setup > Accounts > Clients.

  3. In the client Credentials tab, add the credential information. Credential settings include:

    • Type: NetApp

    • Use Password Vault: If enabled, specify Policy Mapping, otherwise, enter a password:

      • Policy mapping enables integration of a Password Manager application with credentials.
      • Password is the authentication password to access a resource.
    • Port:

      • For HTTP, use port 80.
      • For HTTPS, select Is Secure and use port 443.

Configure and install the integration

  1. From All Clients, select a client.
  2. Navigate to Setup > Account.
  3. Select the Integrations and Apps tab.
  4. The Installed Integrations page, where all the installed applications are displayed. If there are no installed applications, it will navigate to the Available Integrations and Apps page.
  5. Click + ADD on the Installed Integrations page. The Available Integrations and Apps page displays all the available applications along with the newly created application with the version.
    Note: Search for the application using the search option available. Alternatively, use the All Categories option to search.
NetApp Filer Integrations
  1. Click ADD in the NetApp Filer application.
  2. In the Configuration page, enter the below information:
FunctionalityDescription
NameEnter the name for the configuration.
Ip AddressEnter the IP address.
CredentialSetSelect the CredentialSet from the drop-down list.

Note: Click + Add to create a credential.
  1. In the FILTER BY RESOURCE TYPE section, select:

    • ALL: All the existing and future resources will be discovered.
    • SELECT: You can select one or multiple resources to be discovered.
    • Enter the Key, Operator, and Value information.
  2. In the RESOURCE TYPE section, select:

    • ALL: All the existing and future resources will be discovered.
    • SELECT: You can select one or multiple resources to be discovered.
  3. From the Perform Actions section, choose Manage Device to set the resources as managed.

  4. In the DISCOVERY SCHEDULE section, select recurrence pattern to add one of the following patterns:

    • Minutes
    • Hourly
    • Daily
    • Weekly
    • Monthly
  5. (Optional) Under the ADVANCED SETTINGS, Select the Bypass Resource Reconciliation option, if you wish to bypass resource reconciliation when encountering the same resources discovered by multiple applications.

    Note: If two different applications provide identical discovery attributes, two separate resources will be generated with those respective attributes from the individual discoveries.

  6. Click NEXT.

NetApp Filer Integrations
  1. (Optional) Click +ADD to create a new collector by providing a name or use the pre-populated name.
Aruba Airwave Integrations
  1. Select an existing registered profile, and click FINISH.

The application is now installed and displayed on the INSTALLED INTEGRATIONS page. Use the search field to find the installed application.

  1. (Optional), Select the NetApp Filer Integration.
  2. (Optional), Click the ellipses and choose the View resources option.
NetApp Filer Integrations

View the NetApp Filer details

The NetApp Filer integration is displayed in the Infrastructure > Resources > Storage > NetApp Filer. You can navigate to the Attributes tab to view the discovery details, and the Metrics tab to view the metric details for NetApp Filer.

View resource metrics

To confirm NetApp Filer resource monitoring, review the following:

  • Metric graphs: A graph is plotted for each metric that is enabled in the configuration.
  • Alerts: Alerts are generated for metrics that are configured as defined for integration.