Supported Metrics and Default Monitoring Configuration

Supported Metrics

The following tabs represent the Metric Category of Cisco Viptela (SD-WAN)

Tabbed Interface with Table

Availability

Performance

Usage

Native Type	Metric Name	Display Name	Units	Application Version	Description
Viptela vManage	viptela_vManage_certificate_days_to_expiry	Viptela Certificate Days To Expiry	days	5.0.0	Days remaining before each device certificate expires, one instance per device (controllers and WAN edges). Negative means already expired. Collected fleet-wide from vManage in a single call. Warning/critical bands (e.g. under 30 / under 7 days) are configured tenant-side.
	viptela_vManage_api_availability	Viptela vManage API Availability Status		1.0.0	Provides Viptela API availability status. Possible values are 1(Up) - Successfully connected to Viptela API and 2(Down) -Failed to connect to Viptela API.
	viptela_vManage_certificate_days_to_expiry	Viptela Certificate Days To Expiry	days	5.0.0	Days remaining before each device certificate expires, one instance per device (controllers and WAN edges). Negative means already expired. Collected fleet-wide from vManage in a single call. Warning/critical bands (e.g. under 30 / under 7 days) are configured tenant-side.
	viptela_vManage_system_state	Viptela vManage System State		1.0.0	Provides State of the system. Possible values are green(1) All processes are up, blinking green(2) Router processes are coming up, yellow(3) This state color is not used, red(4) One or more processes are down, Undefined(0).
	viptela_vManage_device_reachability	Viptela vManage Device Reachability Status		1.0.0	Provides viptela device reachability from vManage
Viptela vEdge
	viptela_vedge_bgp_neighbor_state	Viptela vEdge BGP Neighbor State		5.0.0	Per-neighbour BGP session state. 1 = Established, 0 = any other state (Idle/Active/Connect). One instance per neighbour, keyed by neighbour IP and AS.
	viptela_vedge_omp_peer_state	Viptela vEdge OMP Peer State		5.0.0	Per-peer OMP adjacency state. 1 = up, 0 = down. One instance per OMP peer.
	viptela_vedge_control_connection_state	Viptela vEdge Control Connection State		5.0.0	Per-connection control-plane state. 1 = up, 0 = down. One instance per control connection, keyed by peer type, peer system-ip and local/remote colour.
	viptela_vedge_bfd_session_state	Viptela vEdge BFD Session State		5.0.0	Per-tunnel BFD session state. 1 = up, 0 = down. One instance per data-plane tunnel, keyed by remote endpoint and transport colour.
	viptela_vedge_tracker_state	Viptela vEdge Tracker State		5.0.0	Interface / IP-SLA tracker state. 1 = up, 0 = down. Covers track-object and IP-SLA probe failure; vManage reports the resolved verdict rather than individual probes.
	viptela_vedge_control_status	Viptela vEdge Control Connection Status		4.0.0	Health of the vEdge's control-plane connections to controllers (vManage/vSmart/vBond). 1 = healthy, 0 = error.
	viptela_vedge_bfd_status	Viptela vEdge BFD Session Status		4.0.0	Health of data-plane BFD sessions on the vEdge. 1 = healthy, 0 = error.
	viptela_vedge_omp_oper_state	Viptela vEdge OMP Operational State		4.0.0	Operational state of the OMP daemon on the vEdge. 1 = UP, 0 = anything else.
	viptela_vedge_omp_admin_state	Viptela vEdge OMP Administrative State		4.0.0	Administrative state of the OMP daemon on the vEdge. 1 = UP, 0 = anything else.
	viptela_vedge_bgp_status	Viptela vEdge BGP Status		4.0.0	Aggregate health of BGP neighbors on the vEdge. 1 = healthy, 0 = error.
	viptela_vEdge_hardware_pemPowerSupply	Viptela vEdge Power Supply Status		1.0.0	Provides the power supply status. If Present and Powered On are YES and Fault is NO (Present: YES; Powered On: YES; Fault: NO) in measurement value then status is 1 otherwise 2.
	viptela_vEdge_system_state	Viptela vEdge Power Supply Status		1.0.0	Provides the power supply status. If Present and Powered On are YES and Fault is NO (Present: YES; Powered On: YES; Fault: NO) in measurement value then status is 1 otherwise 2.
	viptela_vEdge_system_uptime	Viptela vEdge System Uptime	Days	1.0.0	Provides UPTIME of the system in seconds
	viptela_vEdge_device_reachabilitys	Viptela vEdge Device Reachability Status		1.0.0	Provides viptela device reachability from vManage
	viptela_vEdge_interface_status	Viptela vEdge Interface Status		1.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value.
Viptela vBond	viptela_vBond_system_state	Viptela vBond System State		1.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value.
	viptela_vBond_system_uptime	Viptela vBond System Uptime	Days	1.0.0	Provides UPTIME of the system in seconds
	viptela_vBond_device_reachability	Viptela vBond Device Reachability Status		1.0.0	Provides viptela device reachability from vManage
Viptela vSmart	viptela_vsmart_omp_oper_state	Viptela vSmart OMP Operational State		4.0.0	Operational state of the OMP daemon on the vSmart. 1 = UP, 0 = anything else.
	viptela_vsmart_omp_admin_state	Viptela vSmart OMP Administrative State		4.0.0	Administrative state of the OMP daemon on the vSmart. 1 = UP, 0 = anything else.
	viptela_vSmart_system_state	Viptela vSmart System State		1.0.0	Provides State of the system. Possible values are green(1) All processes are up, blinking green(2) Router processes are coming up, yellow(3) This state color is not used, red(4) One or more processes are down, Undefined(0).
	viptela_vSmart_system_uptime	Viptela vSmart System Uptime	Days	1.0.0	Provides UPTIME of the system in seconds
	viptela_vSmart_device_reachability	Viptela vSmart Device Reachability Status		1.0.0	Provides viptela device reachability from vManage
	viptela_vSmart_interface_Status	Viptela vSmart Interface Status		1.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value.
Viptela cEdge	viptela_cedge_bgp_neighbor_state	Viptela cEdge BGP Neighbor State		5.0.0	Per-neighbour BGP session state. 1 = Established, 0 = any other state (Idle/Active/Connect). One instance per neighbour, keyed by neighbour IP and AS.
	viptela_cedge_omp_peer_state	Viptela cEdge OMP Peer State		5.0.0	Per-peer OMP adjacency state. 1 = up, 0 = down. One instance per OMP peer.
	viptela_cedge_control_connection_state	Viptela cEdge Control Connection State		5.0.0	Per-connection control-plane state. 1 = up, 0 = down. One instance per control connection, keyed by peer type, peer system-ip and local/remote colour.
	viptela_cedge_bfd_session_state	Viptela cEdge BFD Session State		5.0.0	Per-tunnel BFD session state. 1 = up, 0 = down. One instance per data-plane tunnel, keyed by remote endpoint and transport colour.
	viptela_cedge_tracker_state	Viptela cEdge Tracker State		5.0.0	Interface / IP-SLA tracker state. 1 = up, 0 = down. Covers track-object and IP-SLA probe failure; vManage reports the resolved verdict rather than individual probes.
	viptela_cedge_control_status	Viptela cEdge Control Connection Status		4.0.0	Health of the cEdge's control-plane connections to controllers (vManage/vSmart/vBond). 1 = healthy, 0 = error.
	viptela_cedge_control_status	Viptela cEdge Control Connection Status		4.0.0	Health of the cEdge's control-plane connections to controllers (vManage/vSmart/vBond). 1 = healthy, 0 = error.
	viptela_cedge_bfd_status	Viptela cEdge BFD Session Status		4.0.0	Health of data-plane BFD sessions on the cEdge. 1 = healthy, 0 = error.
	viptela_cedge_omp_oper_state	Viptela cEdge OMP Operational State		4.0.0	Operational state of the OMP daemon on the cEdge. 1 = UP, 0 = anything else.
	viptela_cedge_omp_admin_state	Viptela cEdge OMP Administrative State		4.0.0	Administrative state of the OMP daemon on the cEdge. 1 = UP, 0 = anything else.
	viptela_cedge_bgp_status	Viptela cEdge BGP Status		4.0.0	Aggregate health of BGP neighbors on the cEdge. 1 = healthy, 0 = error.
	viptela_cEdge_hardware_pemPowerSupplys	Viptela cEdge Power Supply Status		1.0.0	Provides the power supply status. If Present and Powered On are YES and Fault is NO (Present: YES; Powered On: YES; Fault: NO) in measurement value then status is 1 otherwise 2.
	viptela_cEdge_system_state	Viptela cEdge System State		1.0.0	Provides State of the system. Possible values are green(1) All processes are up, blinking green(2) Router processes are coming up, yellow(3) This state color is not used, red(4) One or more processes are down, Undefined(0).
	viptela_cEdge_system_uptime	Viptela cEdge System Uptime	Days	1.0.0	Provides UPTIME of the system in seconds
	viptela_cEdge_device_reachability	Viptela cEdge Device Reachability Status		1.0.0	Provides viptela device reachability from vManage
Viptela Interface	viptela_interface_availability_status	Viptela Interface Availability Status		3.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value
Viptela Interface	viptela_interface_admin_status	Viptela Interface Admin Status		3.0.0	Provides the status of the interface based on if-admin-status values. Possible values are Up(1) - Admin Status is Up, Down(0) - Admin Status is Down, Undefined(2) - n/a. if-state-up (1) , if-state-down (0)
Viptela vEdge Interface	viptela_vedge_interface_availability_status	Viptela vEdge Interface Availability Status		3.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value
Viptela vEdge Interface	viptela_vedge_interface_admin_status	Viptela vEdge Interface Admin Status		3.0.0	Provides the status of the interface based on if-admin-status values. Possible values are Up(1) - Admin Status is Up, Down(0) - Admin Status is Down, Undefined(2) - n/a. if-state-up (1) , if-state-down (0)
Viptela cEdge Interface	viptela_cedege_interface_availability_status	Viptela cEdge Interface Availability Status		3.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value
Viptela cEdge Interface	viptela_cedege_interface_admin_status	Viptela cEdge Interface Admin Status		3.0.0	Provides the status of the interface based on if-admin-status values. Possible values are Up(1) - Admin Status is Up, Down(0) - Admin Status is Down, Undefined(2) - n/a. if-state-up (1) , if-state-down (0)
Viptela vBond Interface	viptela_vbond_interface_availability_status	Viptela vBond Interface Availability Status		3.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value
Viptela vBond Interface	viptela_vbond_interface_admin_status	Viptela vBond Interface Admin Status		3.0.0	Provides the status of the interface based on if-admin-status values. Possible values are Up(1) - Admin Status is Up, Down(0) - Admin Status is Down, Undefined(2) - n/a. if-state-up (1) , if-state-down (0)
Viptela vSmart Interface	viptela_vsmart_omp_peer_state	Viptela vSmart OMP Peer State		5.0.0	Per-peer OMP adjacency state on the vSmart. 1 = up, 0 = down.
	viptela_vsmart_interface_availability_status	Viptela vSmart Interface Availability Status		3.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value
	viptela_vsmart_interface_admin_status	Viptela vSmart Interface Admin Status		3.0.0	Provides the status of the interface based on if-admin-status values. Possible values are Up(1) - Admin Status is Up, Down(0) - Admin Status is Down, Undefined(2) - n/a. if-state-up (1) , if-state-down (0)

Native Type	Metric Name	Display Name	Units	Application Version	Description
Viptela vManage	viptela_vManage_cpu_loadMin	Viptela vManage CPU Load		1.0.0	Provides CPU load average for past 5 minutes.
	viptela_vManage_cpu_usage	Viptela vManage CPU Utilization	%	1.0.0	Provides the percentage of CPU that is being used by the System. The value is measured as 100 - cpu_idle.
	viptela_vManage_disk_usage	Viptela vManage Disk Utilization	%	1.0.0	Provides disk utilization in percentage.
	viptela_vManage_memory_usage	Viptela vManage Memory Utilization	%	1.0.0	Provides physical RAM utilization in percentage. Calculated using ((mem_used - mem_cached - mem_buffers) / mem_total) * 100.
	viptela_vManage_storage_usage	Viptela vManage Storage Utilization		1.0.0	Provides Viptela vManage storage utilization in percentage.
Viptela vEdge	viptela_vedge_bgp_prefixes_received	Viptela vEdge BGP Prefixes Received		5.0.0	Prefixes received per BGP neighbour. Raw count for baseline/deviation rules.
	viptela_vedge_omp_vsmart_peers	Viptela vEdge OMP vSmart Peers		5.0.0	Number of vSmart peers in the OMP session. Raw count for baseline/deviation rules.
	viptela_vedge_omp_routes	Viptela vEdge OMP Routes		5.0.0	OMP routes, one instance per direction: "received" and "installed". Raw counts for baseline/deviation rules (e.g. >20% drop from baseline).
	viptela_vedge_control_connections_count	Viptela vEdge Control Connections Count		5.0.0	Total control connections reported by vManage. Raw count for baseline/deviation rules.
	viptela_vedge_bfd_sessions_count	Viptela vEdge BFD Sessions Count		5.0.0	Total BFD (data-plane) sessions reported by vManage.
	viptela_vedge_bfd_session_transitions	Viptela vEdge BFD Session Transitions		5.0.0	Cumulative count of BFD session state changes, as reported by vManage. Use a rate/delta rule for flap detection (e.g. more than 3 transitions in 15 minutes).
	viptela_vedge_tracker_delay	Viptela vEdge Tracker Delay	ms	5.0.0	Measured tracker/IP-SLA delay. Not published when vManage reports no measurement.
	viptela_vEdge_tunnel_latency	Viptela vEdge Tunnel Latency	ms	5.0.0	Per-tunnel latency. One instance per data-plane tunnel, keyed by remote system-ip and local/remote transport colour.
	viptela_vEdge_tunnel_jitter	Viptela vEdge Tunnel Jitter	ms	5.0.0	Per-tunnel jitter. One instance per data-plane tunnel.
	viptela_vEdge_tunnel_loss	Viptela vEdge Tunnel Loss	%	5.0.0	Per-tunnel packet loss. One instance per data-plane tunnel.
	viptela_vEdge_hardware_tempSensorsBoard	Viptela vEdge Board Temperature	Celsius	1.0.0	Provides the hardware board temperature in Celsius.
	viptela_vEdge_hardware_tempSensorsCpuJunction	Viptela vEdge CPU Junction Temperature	Celsius	1.0.0	Provides the viptela hardware CPU junction temperature in Celsius.
	viptela_vEdge_hardware_tempSensorsDram	Viptela vEdge Dram Temperature	Celsius	1.0.0	Provides the Viptela Hardware DRAM Temperature in Celsius.
	viptela_vEdge_hardware_tempSensorsPim	Viptela vEdge PIM Temperature	Celsius	1.0.0	Provides the Viptela Hardware PIM Temperature in Celsius.
	viptela_vEdge_tunnel_avgJitter	Viptela vEdge Avg Tunnel Jitter	ms	1.0.0	Viptela tunnel average packet JITTER value between two vEdge routers.
	viptela_vEdge_tunnel_avgLatency	Viptela vEdge Avg Tunnel Latency	ms	1.0.0	Viptela tunnel average packet LATENCY between two vEdge routers.
	viptela_vEdge_tunnel_avgLoss	Viptela vEdge Avg Tunnel Loss Percentage	%	1.0.0	Viptela tunnel average PACKET LOSS percentage between two vEdge routers.
	viptela_vEdge_cpu_loadMin	Viptela vEdge CPU Load	NULL	1.0.0	Provides CPU load average for past 5 minutes.
	viptela_vEdge_cpu_usage	Viptela vEdge CPU Utilization	%	1.0.0	Provides the percentage of CPU that is being used by the System. The value is measured as 100 - cpu_idle.
	viptela_vEdge_disk_usage	Viptela vEdge Disk Utilization	%	1.0.0	Provides disk utilization in percentage.
	viptela_vEdge_memory_usage	Viptela vEdge Memory Utilization	%	1.0.0	Provides physical RAM utilization in percentage. Calculated using ((mem_used - mem_cached - mem_buffers) / mem_total) * 100.
	viptela_vEdge_interface_dropsIn	Viptela vEdge Interface Drops In	packet/min	1.0.0	Provides the number of Inbound dropped packets per minute.
	viptela_vEdge_interface_dropsOut	Viptela vEdge Interface Drops Out	packet/min	1.0.0	Provides the number of Outbound dropped packets per minute.
	viptela_vEdge_interface_errorsIn	Viptela vEdge Interface Errors In	packet/min	1.0.0	Provides the number of Inbound error packets per minute.
	viptela_vEdge_interface_errorsOut	Viptela vEdge Interface Errors Out	packet/min	1.0.0	Provides the number of Outbound error packets per minute.
	viptela_vEdge_interface_trafficIn	Viptela vEdge Interface Traffic In	Mbps	1.0.0	Metric calculates the network interface Octets received on the interface.
	viptela_vEdge_interface_trafficOut	Viptela vEdge Interface Traffic Out	Mbps	1.0.0	Metric calculates the network interface Octets transmitted on the interface.
	viptela_vEdge_interface_utilizationIn	Viptela vEdge Interface Utilization In	%	1.0.0	Metric calculates the network traffic Inbound utilization percentage.
	viptela_vEdge_interface_utilizationOut	Viptela vEdge Interface Utilization Out	%	1.0.0	Metric calculates the network traffic outbound utilization percentage.
Viptela vBond	viptela_vBond_cpu_loadMin	Viptela vBond CPU Load		1.0.0	Provides CPU load average for past 5 minutes
	viptela_vBond_cpu_usage	Viptela vBond CPU Utilization	%	1.0.0	Provides the percentage of CPU that is being used by the System. The value is measured as 100 - cpu_idle
	viptela_vBond_disk_usage	Viptela vBond Disk Utilization	%	1.0.0	Provides disk utilization in percentage.
	viptela_vBond_memory_usage	Viptela vBond Memory Utilization	%	1.0.0	Provides physical RAM utilization in percentage. Calculated using ((mem_used - mem_cached - mem_buffers) / mem_total) * 100.
	viptela_vBond_interface_dropsIn	Viptela vBond Interface Drops In	packet/min	1.0.0	Provides the number of Inbound dropped packets per minute.
	viptela_vBond_interface_dropsOut	Viptela vBond Interface Drops Out	packet/min	1.0.0	Provides the number of Outbound dropped packets per minute.
	viptela_vBond_interface_errorsIn	Viptela vBond Interface Errors In	packet/min	1.0.0	Provides the number of Inbound error packets per minute.
	viptela_vBond_interface_errorsOut	Viptela vBond Interface Errors Out	packet/min	1.0.0	Provides the number of Outbound error packets per minute.
	viptela_vBond_interface_status	Viptela vBond Interface Status	NULL	1.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value.
	viptela_vBond_interface_trafficIn	Viptela vBond Interface Traffic In	Mbps	1.0.0	Metric calculates the network interface Octets received on the interface.
	viptela_vBond_interface_trafficOut	Viptela vBond Interface Traffic Out	Mbps	1.0.0	Metric calculates the network interface Octets transmitted on the interface.
	viptela_vBond_interface_utilizationIn	Viptela vBond Interface Utilization In	%	1.0.0	Metric calculates the network traffic Inbound utilization percentage.
	viptela_vBond_interface_utilizationOut	Viptela vBond Interface Utilization Out	%	1.0.0	Metric calculates the network traffic outbound utilization percentage.
Viptela vSmart	viptela_vsmart_omp_vsmart_peers	Viptela vSmart OMP Peers		5.0.0	Number of OMP peers. Raw count for baseline/deviation rules.
	viptela_vsmart_omp_routes	Viptela vSmart OMP Routes		5.0.0	OMP routes, one instance per direction: "received" and "installed". Raw counts for baseline/deviation rules (e.g. >20% drop from baseline).
	viptela_vSmart_cpu_usage	Viptela vSmart CPU Utilization	%	1.0.0	Provides the percentage of CPU that is being used by the System. The value is measured as 100 - cpu_idle.
	viptela_vSmart_disk_usage	Viptela vSmart Disk Utilization	%	1.0.0	Provides disk utilization in percentage.
	viptela_vSmart_memory_usage	Viptela vSmart Memory Utilization	%	1.0.0	Provides physical RAM utilization in percentage. Calculated using ((mem_used - mem_cached - mem_buffers) / mem_total) * 100.
	viptela_vSmart_interface_DropsIn	Viptela vSmart Interface Drops In	packet/min	1.0.0	Provides the number of Inbound dropped packets per minute.
	viptela_vSmart_interface_DropsOut	Viptela vSmart Interface Drops Out	packet/min	1.0.0	Provides the number of Outbound dropped packets per minute.
	viptela_vSmart_interface_ErrorsIn	Viptela vSmart Interface Errors In	packet/min	1.0.0	Provides the number of Inbound error packets per minute.
	viptela_vSmart_interface_ErrorsOut	Viptela vSmart Interface Errors Out	packet/min	1.0.0	Provides the number of Outbound error packets per minute.
	viptela_vSmart_interface_trafficIn	Viptela vSmart Interface Traffic In	Mbps	1.0.0	Metric calculates the network interface Octets received on the interface.
	viptela_vSmart_interface_trafficOut	Viptela vSmart Interface Traffic Out	Mbps	1.0.0	Metric calculates the network interface Octets transmitted on the interface.
	viptela_vSmart_interface_utilizationIn	Viptela vSmart Interface Utilization In	%	1.0.0	Metric calculates the network traffic Inbound utilization percentage.
	viptela_vSmart_interface_utilizationOut	Viptela vSmart Interface Utilization Out	%	1.0.0	Metric calculates the network traffic outbound utilization percentage.
Viptela cEdge
	viptela_cedge_bgp_prefixes_received	Viptela cEdge BGP Prefixes Received		5.0.0	Prefixes received per BGP neighbour. Raw count for baseline/deviation rules.
	viptela_cedge_omp_vsmart_peers	Viptela cEdge OMP vSmart Peers		5.0.0	Number of vSmart peers in the OMP session. Raw count for baseline/deviation rules.
	viptela_cedge_omp_routes	Viptela cEdge OMP Routes		5.0.0	OMP routes, one instance per direction: "received" and "installed". Raw counts for baseline/deviation rules (e.g. >20% drop from baseline).
	viptela_cedge_control_connections_count	Viptela cEdge Control Connections Count		5.0.0	Total control connections reported by vManage. Raw count for baseline/deviation rules.
	viptela_cedge_bfd_sessions_count	Viptela cEdge BFD Sessions Count		5.0.0	Total BFD (data-plane) sessions reported by vManage.
	viptela_cedge_bfd_session_transitions	Viptela cEdge BFD Session Transitions		5.0.0	Cumulative count of BFD session state changes, as reported by vManage. Use a rate/delta rule for flap detection (e.g. more than 3 transitions in 15 minutes).
	viptela_cedge_tracker_delay	Viptela cEdge Tracker Delay	ms	5.0.0	Measured tracker/IP-SLA delay. Not published when vManage reports no measurement.
	viptela_cEdge_tunnel_latency	Viptela cEdge Tunnel Latency	ms	5.0.0	Per-tunnel latency. One instance per data-plane tunnel, keyed by remote system-ip and local/remote transport colour.
	viptela_cEdge_tunnel_jitter	Viptela cEdge Tunnel Jitter	ms	5.0.0	Per-tunnel jitter. One instance per data-plane tunnel.
	viptela_cEdge_tunnel_loss	Viptela cEdge Tunnel Loss	%	5.0.0	Per-tunnel packet loss. One instance per data-plane tunnel.
	viptela_cEdge_hardware_tempSensorsBoard	Viptela cEdge Board Temperature	Celsius	1.0.0	Provides the hardware board temperature in Celsius.
	viptela_cEdge_hardware_tempSensorsCpuJunction	Viptela cEdge CPU Junction Temperature	Celsius	1.0.0	Provides the viptela hardware CPU junction temperature in Celsius.
	viptela_cEdge_hardware_tempSensorsDram	Viptela cEdge Dram Temperature	Celsius	1.0.0	Provides the Viptela Hardware DRAM Temperature in Celsius.
	viptela_cEdge_hardware_tempSensorsPim	Viptela cEdge PIM Temperature	Celsius	1.0.0	Provides the Viptela Hardware PIM Temperature in Celsius.
	viptela_cEdge_tunnel_avgJitter	Viptela cEdge Avg Tunnel Jitter	ms	1.0.0	Viptela tunnel average packet JITTER value between two vEdge routers.
	viptela_cEdge_tunnel_avgLatency	Viptela cEdge Avg Tunnel Latency	ms	1.0.0	Viptela tunnel average packet LATENCY between two vEdge routers.
	viptela_cEdge_tunnel_avgLoss	Viptela cEdge Avg Tunnel Loss Percentage	%	1.0.0	Viptela tunnel average PACKET LOSS percentage between two vEdge routers.
	viptela_cEdge_cpu_loadMin	Viptela cEdge CPU Load	NULL	1.0.0	Provides CPU load average for past 5 minutes.
	viptela_cEdge_cpu_usage	Viptela cEdge CPU Utilization	%	1.0.0	Provides the percentage of CPU that is being used by the System. The value is measured as 100 - cpu_idle.
	viptela_cEdge_disk_usage	Viptela cEdge Disk Utilization	%	1.0.0	Provides disk utilization in percentage.
	viptela_cEdge_memory_usage	Viptela cEdge Memory Utilization	%	1.0.0	Provides physical RAM utilization in percentage. Calculated using ((mem_used - mem_cached - mem_buffers) / mem_total) * 100.
	viptela_cEdge_interface_dropsIn	Viptela cEdge Interface Drops In	packet/min	1.0.0	Provides the number of Inbound dropped packets per minute.
	viptela_cEdge_interface_dropsOut	Viptela cEdge Interface Drops Out	packet/min	1.0.0	Provides the number of Outbound dropped packets per minute.
	viptela_cEdge_interface_errorsIn	Viptela cEdge Interface Errors In	packet/min	1.0.0	Provides the number of Inbound error packets per minute.
	viptela_cEdge_interface_errorsOut	Viptela cEdge Interface Errors Out	packet/min	1.0.0	Provides the number of Outbound error packets per minute.
	viptela_cEdge_interface_status	Viptela cEdge Interface Status	NULL	1.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value.
	viptela_cEdge_interface_trafficIn	Viptela cEdge Interface Traffic In	Mbps	1.0.0	Metric calculates the network interface Octets received on the interface.
	viptela_cEdge_interface_trafficOut	Viptela cEdge Interface Traffic Out	Mbps	1.0.0	Metric calculates the network interface Octets transmitted on the interface.
	viptela_cEdge_interface_utilizationIn	Viptela cEdge Interface Utilization In	%	1.0.0	Metric calculates the network traffic Inbound utilization percentage.
viptela_cEdge_interface_utilizationOut	Viptela cEdge Interface Utilization Out	%	1.0.0	Metric calculates the network traffic outbound utilization percentage.
Viptela Interface	viptela_interface_admin_status	Viptela Interface Admin Status	5.0.0	2.0.0	Provides the status of the interface based on if-admin-status values. Possible values are Up(1) - Admin Status is Up, Down(0) - Admin Status is Down, Undefined(2) - n/a. if-state-up (1) , if-state-down (0).
	viptela_interface_Drops_in	Viptela Interface Drops In	packet/min	1.0.0	Provides the number of Inbound dropped packets per minute.
	viptela_interface_drops_out	Viptela Interface Drops Out	packet/min	1.0.0	Provides the number of Outbound dropped packets per minute.
	viptela_interface_errors_in	Viptela Interface Errors In	packet/min	1.0.0	Provides the number of Inbound error packets per minute.
	viptela_interface_errors_out	Viptela Interface Errors Out	packet/min	1.0.0	Provides the number of Outbound error packets per minute.
	viptela_interface_status	Viptela Interface Status	NULL	1.0.0	Provides the status of the interface based on if-admin-status, if-oper-status values. Possible values are Up(1) - Operational Status is Up, Down(2) - Operational Status is Down, AdminDown(3) - Admin Status is Down, Undefined(0) - Unknown value.
	viptela_interface_traffic_in	Viptela Interface Traffic In	Mbps	1.0.0	Metric calculates the network interface Octets received on the interface.
	viptela_interface_traffic_out	Viptela Interface Traffic Out	Mbps	1.0.0	Metric calculates the network interface Octets transmitted on the interface.
	viptela_interface_utilization_in	Viptela Interface Utilization In	%	1.0.0	Metric calculates the network traffic Inbound utilization percentage.
	viptela_interface_utilization_out	Viptela Interface Utilization Out	%	1.0.0	Metric calculates the network traffic outbound utilization percentage.
	viptela_interface_dropsIn	Viptela Interface Drops In	packet/min	3.0.0	Provides the number of Inbound dropped packets per minute
	viptela_interface_dropsOut	Viptela Interface Drops Out	packet/min	3.0.0	Provides the number of Outbound dropped packets per minute
	viptela_interface_errorsIn	Viptela Interface Errors In	packet/min	3.0.0	Provides the number of Inbound error packets per minute
	viptela_interface_errorsOut	Viptela Interface Errors Out	packet/min	3.0.0	Provides the number of Outbound error packets per minute
	viptela_interface_trafficIn	Viptela Interface Traffic In	Mbps	3.0.0	Metric calculates the network interface Octets received on the interface
	viptela_interface_trafficOut	Viptela Interface Traffic Out	Mbps	3.0.0	Metric calculates the network interface Octets transmitted on the interface
	viptela_interface_utilizationIn	Viptela Interface Utilization In	%	3.0.0	Metric calculates the network traffic Inbound utilization percentage
	viptela_interface_utilizationOut	Viptela Interface Utilization Out	%	3.0.0	Metric calculates the network traffic outbound utilization percentage
Viptela vEdge Interface	viptela_vedge_interface_dropsIn	Viptela Interface Drops In	packet/min	3.0.0	Provides the number of Inbound dropped packets per minute
	viptela_vedge_interface_dropsOut	Viptela vEdge Interface Drops Out	packet/min	3.0.0	Provides the number of Outbound dropped packets per minute
	viptela_vedge_interface_errorsIn	Viptela vEdge Interface Errors In	packet/min	3.0.0	Provides the number of Inbound error packets per minute
	viptela_vedge_interface_errorsOut	Viptela vEdge Interface Errors Out	packet/min	3.0.0	Provides the number of Outbound error packets per minute
	viptela_vedge_interface_trafficIn	Viptela vEdge Interface Traffic In	Mbps	3.0.0	Metric calculates the network interface Octets received on the interface
	viptela_vedge_interface_trafficOut	Viptela vEdge Interface Traffic Out	Mbps	3.0.0	Metric calculates the network interface Octets transmitted on the interface
	viptela_vedge_interface_utilizationIn	Viptela vEdge Interface Utilization In	%	3.0.0	Metric calculates the network traffic Inbound utilization percentage
	viptela_vedge_interface_utilizationOut	Viptela vEdge Interface Utilization Out	%	3.0.0	Metric calculates the network traffic outbound utilization percentage
Viptela cEdge Interface	viptela_cedege_interface_dropsIn	Viptela cEdge Interface Drops In	packet/min	3.0.0	Provides the number of Inbound dropped packets per minute
	viptela_cedege_interface_dropsOut	Viptela cEdge Interface Drops Out	packet/min	3.0.0	Provides the number of Outbound dropped packets per minute
	viptela_cedege_interface_errorsIn	Viptela cEdge Interface Errors In	packet/min	3.0.0	Provides the number of Inbound error packets per minute
	viptela_cedege_interface_errorsOut	Viptela cEdge Interface Errors Out	packet/min	3.0.0	Provides the number of Outbound error packets per minute
	viptela_cedege_interface_trafficIn	Viptela cEdge Interface Traffic In	Mbps	3.0.0	Metric calculates the network interface Octets received on the interface
	viptela_cedege_interface_trafficOut	Viptela cEdge Interface Traffic Out	Mbps	3.0.0	Metric calculates the network interface Octets transmitted on the interface
	viptela_cedege_interface_utilizationIn	Viptela cEdge Interface Utilization In	%	3.0.0	Metric calculates the network traffic Inbound utilization percentage
Viptela vBond Interface	viptela_vbond_interface_dropsIn	Viptela vBond Interface Drops In	packet/min	3.0.0	Provides the number of Inbound dropped packets per minute
	viptela_vbond_interface_dropsOut	Viptela vBond Interface Drops Out	packet/min	3.0.0	Provides the number of Outbound dropped packets per minute
	viptela_vbond_interface_errorsIn	Viptela vBond Interface Errors In	packet/min	3.0.0	Provides the number of Inbound error packets per minute
	viptela_vbond_interface_errorsOut	Viptela vBond Interface Errors Out	packet/min	3.0.0	Provides the number of Outbound error packets per minute
	viptela_vbond_interface_trafficIn	Viptela vBond Interface Traffic In	Mbps	3.0.0	Metric calculates the network interface Octets received on the interface
	viptela_vbond_interface_trafficOut	Viptela vBond Interface Traffic Out	Mbps	3.0.0	Metric calculates the network interface Octets transmitted on the interface
	viptela_vbond_interface_utilizationIn	Viptela vBond Interface Utilization In	%	3.0.0	Metric calculates the network traffic Inbound utilization percentage
	viptela_vbond_interface_utilizationOut	Viptela vBond Interface Utilization Out	%	3.0.0	Metric calculates the network traffic outbound utilization percentage
Viptela vSmart Interface	viptela_vsmart_interface_dropsIn	Viptela vSmart Interface Drops In	packet/min	3.0.0	Provides the number of Inbound dropped packets per minute
	viptela_vsmart_interface_dropsOut	Viptela vSmart Interface Drops Out	packet/min	3.0.0	Provides the number of Outbound dropped packets per minute
	viptela_vsmart_interface_errorsIn	Viptela vSmart Interface Errors In	packet/min	3.0.0	Provides the number of Inbound error packets per minute
	viptela_vsmart_interface_errorsOut	Viptela vSmart Interface Errors Out	packet/min	3.0.0	Provides the number of Outbound error packets per minute
	viptela_vsmart_interface_trafficIn	Viptela vSmart Interface Traffic In	Mbps	3.0.0	Metric calculates the network interface Octets received on the interface
	viptela_vsmart_interface_trafficOut	Viptela vSmart Interface Traffic Out	Mbps	3.0.0	Metric calculates the network interface Octets transmitted on the interface
	viptela_vsmart_interface_utilizationIn	Viptela vSmart Interface Utilization In	%	3.0.0	Metric calculates the network traffic Inbound utilization percentage
	viptela_vsmart_interface_utilizationOut	Viptela vSmart Interface Utilization Out	%	1.0.0	Metric calculates the network traffic outbound utilization percentage

Native Type	Metric Name	Display Name	Units	Application Version	Description
Viptela vEdge	viptela_vEdge_hardware_fanTray0	Viptela vEdge Tray0 Fan Speed	rpm	1.0.0	Provides Viptela Hardware Tray0 Fan Speed in Revolutions per minutet.
	viptela_vEdge_hardware_fanTray1	Viptela vEdge Tray1 Fan Speed	rpm	1.0.0	Provides Viptela Hardware Tray1 Fan Speed in Revolutions per minute.
	viptela_vEdge_hardware_fanTray2	Viptela vEdge Tray2 Fan Speed	rpm	1.0.0	Provides Viptela Hardware Tray2 Fan Speed in Revolutions per minute.
	viptela_vEdge_hardware_fanTray3	Viptela vEdge Tray3 Fan Speed	rpm	1.0.0	Provides Viptela Hardware Tray3 Fan Speed in Revolutions per minute.
Viptela cEdge	viptela_cEdge_hardware_fanTray0	Viptela cEdge Tray0 Fan Speed	rpm	1.0.0	Provides Viptela Hardware Tray0 Fan Speed in Revolutions per minute.
	viptela_cEdge_hardware_fanTray1	Viptela cEdge Tray1 Fan Speed	rpm	1.0.0	Provides Viptela Hardware Tray1 Fan Speed in Revolutions per minute.
	viptela_cEdge_hardware_fanTray2	Viptela cEdge Tray2 Fan Speed	rpm	1.0.0	Provides Viptela Hardware Tray2 Fan Speed in Revolutions per minute.
	viptela_cEdge_hardware_fanTray3	Viptela cEdge Tray3 Fan Speed	rpm	1.0.0	Provides Viptela Hardware Tray3 Fan Speed in Revolutions per minute.

Default Monitoring Configurations

OpsRamp provides default global configurations for Cisco Viptela (SD-WAN), including Global Device Management Policies, Global Templates, Global Monitors, and Global Metrics. These defaults are designed to streamline your monitoring setup, but they can be customized to align with your specific business requirements by cloning the respective global templates and Device Management Policies. To prevent unnecessary alerts and data noise, it is recommended to complete the following customization tasks before installing the application.

Default Global Configurations

Global Device Management Policies OpsRamp includes a Global Device Management Policy for each Native Type of Viptela vManage. You can locate these policies in the OpsRamp platform by navigating to:
- Path: Setup → Resources → Device Management Policies
- Action: Use the suggested names to search within the global scope.
- Naming Convention format: {appName nativeType - version}
- Example: Viptela-vManage - 1, where
  - appName = cisco-viptela,
  - nativeType = Viptela vManage
  - version = 1.
Global Templates

OpsRamp offers a Global Template for each Native Type of Viptela vManage. You can find these templates in the OpsRamp platform by navigating to:

Path: Setup → Monitoring → Templates
Action: Use the suggested names to search within the global scope.
Naming Convention format: {appName nativeType 'Template' - version}
Example: Viptela-vManage Template - 1`, where:
- appName = cisco-viptela
- nativeType = Viptela vManage
- version = 1

Global Monitors

For each Native Type with monitoring support, OpsRamp provides a Global Monitor. You can access these monitors by navigating to:

Path: Setup → Monitoring → Monitors
Action: Use the suggested names to search within the global scope.
Naming Convention format: {monitorKey appName nativeType - version}
Example: Viptela-vManage Monitor - 1, where:
- monitorKey = Viptela-vManage Monitor
- appName = cisco-viptela
- nativeType = Viptela vManage
- version = 1